So after a lot of twisting (and, I'll admit, tantrum throwing in frustration and my boyfriend taking over) the lid and its little plastic 'cuff' where separated (FYI my bf ended up having to use a butter knife).
The first DIY I wanted to go for was turning the 'cuff' in to a thumb ring. Be prepared for spending a lot of time cleaning glue remnants from it once you've finished!
Obviously I didn't want to cover the black and gold band or the interlocking C's so my chosen decoration had to be focused on the top clear plastic lip. I dug out some lightweight vintage gold toned chain and measured it around the circumference to work out the correct length. I was lucky enough that the ends just overlapped so I opened up one end link, liberally applied glue (I used Tesco's All Purpose...very similar to E6000!) then stuck down the chain. After a few seconds of letting the glue cure I was able to push the open link around the other end of the chain and nip it closed , forming a perfect fitting circle of chain on my ring.
From here onwards it was slightly trial and error as I figured out what looked good and what would not make the ring too chunky. In the end I settled for using some vintage diamante studs which I wedged inside every other link using the same glue to secure. I then sat patiently and picked off any excess, visible glue with a pin (time consuming but works well as chemicals tend to tarnish).
And that's it, one night, one Chanel thumb ring...
[chipped up manicure using Topshop's Milkshake]
And now for the double part of the DIY - remember the glass perfume top? Well turn it upside down and pop a tapered candle inside (you may need to add a little melted wax to the bottom first) for a simple, chic candle holder. Several of these in different sizes with different coloured candles would look amazing!
Click here for my previous posts on Coco inspired DIYs. Feel free to post links in the comments to your own Chanel makes...